Category Archives: Buick Bug 1911

Part #8

      Comments Off on Part #8

Manufactured and installed the steering bracket. I also made earrings for attaching the springs to the frame.

Part #7

      Comments Off on Part #7

I made the supports and installed them in place. The steering gear parts were made of D1.6mm brass bar.

Part #6

      Comments Off on Part #6

Made the front axle. For greater rigidity, the axle was cut according to a template from a sheet of brass 0.5 mm. Then he glued it to the plywood and fixed it with nails, flattening it from the side of the brass template. And he turned the plywood along the contour of the brass template.